View UG06A_60567.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

UG06A THRU UG06D
MINIATURE ULTRAFAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts
Case Style MPG06
Forward Current - 0.6 Ampere
Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as a free wheeling diode Ultrafast reverse recovery times for high efficiency Soft recovery characteristics Excellent high temperature switching Glass passivated junction High temperature soldering guaranteed: 250C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
FEATURES
0.100 (2.54) 0.090 (2.29) DIA
1.0 (25.4) MIN.
0.125 (3.18) 0.115 (2.92)
1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA.
MECHANICAL DATA
Case: Void free molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any WeIght: 0.0064 ounce, 0.181 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
SYMBOLS
UG06A
UG06B
UG06C
UG06D
UNITS
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=75C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) at TL=75C Maximum instantaneous forward voltage at 0.6A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Maximum reverse recovery time
(NOTE 2)
VRRM VRMS VDC I(AV) IFSM VF IR trr TJ=25C TJ=100C TJ=25C TJ=100C trr Qrr CJ RJA RJL TJ, TSTG
50 35 50
100 70 100 0.6 40.0 0.95
150 105 150
200 140 200
Volts Volts Volts Amp Amps Volts A ns ns nC pF C/W C
TA=25C TA=100C
5.0 100.0 15.0 25.0 35.0 8.0 20.0 9.0 97.0 28.0 -55 to +150
Maximum recovered stored charge
(NOTE 2)
Typical junction capacitance (NOTE 3) Typical thermal resistance (NOTE 4) Operating junction and storage temperature range
NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A,Irr=0.25A (2) trr and Qrr measured at IF=0.6A: VR=30V, di/dt=50A/s, Irr=10% IRM for meaurement of trr (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (4) Thermal resistance from junction to ambient and junction to lead at 0.375" (9.5mm) lead length P.C.B. mounted with 0.2 x 0.2" (5.0 x 5.0mm) copper pads
4/98
RATINGS AND CHARACTERISTIC CURVES UG06A THRU UG06D
FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
0.9
AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
0.75
TL, LEAD TEMPERATURE
0.6 0.45 0.3 0.15 0
TA, AMBIENT TEMPERATURE P.C.B. MOUNTED 0.2 x 0.2" (5.0 x 5.0mm) COPPER PADS
PEAK FORWARD SURGE CURRENT, AMPERES
RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH
100
TJ=75C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
10
1
0 25 50 75 100 125 150 175
TEMPERATURE, C
1
10
NUMBER OF CYCLES AT 60 HZ
100
INSTANTANEOUS FORWARD CURRENT, AMPERES
100
TJ=100C
INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS
1,000
10
TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE
100
TJ=100C
10
1
TJ=25C
1
0.1
0.1
0.01 0.4
0.6
0.8
1.0
1.2
1.4
1.6
0.01 0
20
40
60
80
100
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
FIG. 5 - REVERSE SWITCHING CHARACTERISTICS
FIG. 6 - TYPICAL JUNCTION CAPACITANCE
60
RECOVERED pP CHARGE/REVERSE RECOVERY TIME, nC/ns
50 40
di/dt=20A/s
JUNCTION CAPACITANCE, pF
IF=0.6A VR=30V
100
trr Qrr TJ=25C f=1.0 MHZ Vsig=50mVp-p
30 20 10
di/dt=50A/s di/dt=100A/s di/dt=150A/s di/dt=150A/s di/dt=100A/s di/dt=50A/s di/dt=20A/s
10
1 0.1 175
1
10
100
0
REVERSE VOLTAGE, VOLTS
0
25
50
75
100
125
150
JUNCTION TEMPERATURE C

▲Up To Search▲

Price & Availability of UG06A

	To Download UG06A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .